Partikelsizer Retsch Camsizer X2
Bildanalyse (ISO 13322-2)
Inklusive PC mit Software Dongle, Backup CDs und aller Dokumentation / Betriebsanleitung.
Ebenfalls enthalten ist ein Referenzobjekt
Mit diesen Applikationen:
DRUCKLUFTDISPERGIERUNG MIT X-JET
Beim Einsatz des X-Jet Moduls werden diese effektiv im Luftstrom über eine Venturi-Düse aufgetrennt, wobei der Dispergierdruck variabel st. Empfindliche Granulate lassen sich bei geringem Druck zerstörungsfrei analysieren.
NASSMESSUNG MIT X-FLOW
Das Nassmodul X-Flow analysiert Suspensionen in einem Größenbereich von 0,8 μm – 1 mm. Als Dispergiermedien können neben Wasser oder Alkohol auch unpolare organische Lösemittel eingesetzt werden.
FREIFALLMESSUNG MIT X-FALL
Das X-Fall Modul eignet sich zur Analyse. Die Messung ist absolut zerstörungsfrei, da die Partikel von der Förderrinne direkt durch das Messfeld fallen. Mit dem X-Fall können Partikel bis zu 8 mm erfasst werden.
Für zB. folgende Aplikationen :
Metall- und Erzpulver
Zement
Chemikalien
Aktivkohle
Baustoffe
pharmazeutische Pulver
Glas / Glasperlen
Kunststofffasern
Kunststoffpulver
Holzfasern
Lebensmittel
Salz / Zucker
The Retsch Camsizer X2 was build 2016 and 2017 delivered and installed .Beside the qualification it was not used only 2 measurements were done in total !
In the name of science a great opportunity to get this over hundred-thousand Dollar set with a great discount so your Laboratory can generate fast and reliable results under the modern state of art in Particle inspection.
The design of the CAMSIZER X2 is based on the well-proven optical particle measurement system this Camsizer is optimized for finer samples (from 0.8 µm to 8 mm) and various modules to cover the complete section of particle engineering .
The CAMSIZER X2 offers the flexible X-Change system: from the X-Fall module (free fall mode), which is the most gentle method for the material, to the X-Jet module with adjustable pressure and variable nozzle geometry , the X-Flow module in which particles are dispersed
Basic Camsizer X2 : Double cam X module comes with the Elite Desk PC core i7 & windows 10 with special Retsch network-card and preinstalled Software
the Digital image processing with patented two-camera-system "DIA "(acc. to ISO 13322-2)
can measure to the Standard Measuring-range with help of those X features :
-0.8 µm to 8 mm
The set is high Modular and allows the Retsch Camsizer X2 system an easy swap for dry and wet dispersion in a short period as well called "X-Change"
- Measurement results are 100% compatible to sieve analysis if required and takes
Less time- and labor-intensive than sieve analysis
further benefits are :
No-contact, non-destructive measurement
Simple handling prevents operating errors
Calibration in seconds
Password protected instrument settings according GMP
All in all a great R&D or Quality control tool to Test as well abrasives
> (medium-size and small grit)
activated carbon, cement, chemicals, construction materials, detergents and enzymes, foodstuffs
>(pulverized and granulated), glass beads, metal and ore powders, pharmaceutical powders / granules / fine pellets, plastic fibers, plastic powders, salts, sand, sugar, wood fibers, etc.
Camsizer X2 set with following features:
X Flow part no 150.0026 :CAMSIZER X2 part no 151.0001 also offers the option to analyze particles in liquids with the X-Flow module. The suspension flows in a closed circle through a glass cell where the cameras record the particle images.
X Fall part no 150.0022: The X-Fall module is used for non-destructive measurement of sensitive samples in free fall to minimize particle breakage. The sample can be recovered
X Jet part no 150.0021 : The X-Jet module disperses the sample via a Venturi nozzle and is suitable for the effective analysis of powders. The actual measurement of the particles takes place in the air stream.
Sì
